Glove Box Lamp Switch: Service and Repair

Instrument Panel Compartment Lamp Switch Replacement

Removal Procedure




1. Open the instrument panel (I/P) compartment door.
2. Depress the retaining tabs on the top and bottom of the I/P compartment lamp switch.
3. Push the switch out of the opening.
4. Disconnect the electrical connector from the IP compartment lamp switch.
5. Remove the I/P compartment lamp switch.

Installation Procedure




1. Connect the electrical connector to the I/P compartment lamp switch.
2. Position the I/P compartment lamp switch to the opening. Press the switch into the opening.
3. Close the I/P compartment door.