Engine Mount Strut Replacement - Left

Engine Mount Strut Replacement - Left Side

Removal Procedure




1. Remove the bolt and the nut from the engine mount strut at the left engine mount strut bracket on the engine.




2. Remove the bolt and the nut from the engine mount strut at the engine mount strut bracket on the upper radiator support.
3. Remove the engine mount strut.

Installation Procedure




1. Install the engine mount strut.
2. Install the bolt and the nut to the engine mount strut at the engine mount strut bracket on the upper radiator support. HAND TIGHTEN ONLY.





Notice: Refer to Fastener Notice (Fastener Notice) in Cautions and Notices.

3. Install the bolt and the nut to the engine mount strut at the left engine mount strut bracket on the engine.

Tighten bolt engine mount strut nuts to 48 N.m (35 lb ft).