LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Terraza V6-3.9L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> Assemble, Disassemble, and Installation >> Drive Sprocket and Turbine Shaft Disassemble

Drive Sprocket and Turbine Shaft Disassemble



Drive Sprocket and Turbine Shaft Disassemble





Notice: Do not damage the grooves on the shaft, when removing the oil seal rings.

1. Cut the oil seal rings (513, 519) from the turbine shaft (518).
2. Remove the oil seal rings (513, 519).




3. Remove the drive sprocket retaining ring (515).
4. Remove the drive sprocket (516) from the turbine shaft (518).

scientia non olet · About LEMON Manuals