Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
EC Ignition Relay Feedback
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions: Ignition ON Engine OFF. Powertrain Relay commanded ON. | |||
| Ignition 1 voltage | 0 volts | 0 volts | 12 volts |
Ignition 1 Signal
| Circuit | Short to Ground | Open | Short to Voltage |
|---|---|---|---|
| Operating Conditions: Ignition ON Engine OFF. Run/Crank Relay commanded ON. | |||
| Ignition 1 voltage | 0 volts | 0 volts | 12 volts |