LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Controls And Fuel - 4.6L - DTC P0351 To DTC P2440) >> DTC P0685 or P0690 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. With the ignition ON, engine OFF, command the powertrain relay ON and OFF several times using the scan tool output control function, engine controls ignition relay selection. You should either hear or feel the relay click with each command.
  2. With the ignition ON, engine OFF, probe both test points of each of the fuses supplied with voltage by the powertrain relay.
    • The test lamp should illuminate on at least one test point of each fuse. If the test lamp does not illuminate continue with Circuit/System Testing.