Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
MAP Sensor
| Circuit |
Short to Ground |
Open or High Resistance |
Short to Voltage |
Operating Conditions:
Engine running.
Normal MAP Parameter:
12-103 kPa |
| 5-Volt Reference |
10 kPa |
10 kPa |
104 kPa |
| MAP Sensor Signal |
10 kPa |
10 kPa |
104 kPa |
| Low Reference |
- |
90-104 kPa1 |
- |
| 1
Varies depending on ECM version |