LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle - 4T80-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - On Vehicle >> Fluid Level Indicator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Transmission Fluid-level Indicator
    GM99522Courtesy of GENERAL MOTORS CORP.
  1. Remove the fluid-level indicator from the transmission. Rotate the indicator counterclockwise to unlock, then pull the indicator straight out of the transmission.
  2. Inspect the O-ring seal on the indicator for nicks. Replace the seal, if damaged.
scientia non olet · About LEMON Manuals