LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transaxle - 4T80-E - Introduction (2 Of 2)) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Parking Pawl Removal

Parking Pawl Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Expanded View Of Parking Pawl, Spring & Pivot Pin
    GM11869Courtesy of GENERAL MOTORS CORP.
  1. Move the manual shaft out of the Park position.
  2. Push the parking pawl pivot pin (23) towards the side cover with a pin punch. Push down on the spring while driving the pin out. Remove the pivot pin.
  3. Remove the parking pawl (22) and remove the spring (25).
scientia non olet · About LEMON Manuals