LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Mechanical - 4.6L (5 Of 5)) >> Off-Vehicle Repair Instructions (3 Of 3) >> Drive Belt Tensioner Installation

Drive Belt Tensioner Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Drive Belt Tensioner Bolt
    GM522492Courtesy of GENERAL MOTORS CORP.
  1. Install the drive belt tensioner. Be sure to locate the tensioner anchor pin in the cylinder head recess.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the drive belt tensioner bolt.

    Tighten:  Tighten the drive belt tensioner bolt to 50 N.m (37 lb ft).

scientia non olet · About LEMON Manuals