Air Conditioning (A/C) Compressor Installation
WARNING: This page is about a different variant/trim than selected.
- Install the air conditioning compressor stud.
Tighten: Tighten the air conditioning compressor stud to 25 N.m (18 lb ft).
- Slide the air conditioning compressor over the air conditioning compressor stud and hold in position.
- Install the front air conditioning compressor bolt finger tight.
- Install the front air conditioning compressor nut finger tight.
- Install the side air conditioning compressor bolts finger tight.
- Tighten the front air conditioning compressor fasteners in sequence.
Tighten: Tighten the front air conditioning compressor fasteners to 50 N.m (36 lb ft).
- Tighten the side air conditioning compressor fasteners in sequence.
Tighten:
- Tighten the side upper air conditioning compressor bolt to 50 N.m (36 lb ft).
- Tighten the side lower/rear air conditioning compressor bolt to 25 N.m (18 lb ft).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.