LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 4.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Engine Flywheel Removal >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 44214  Flywheel Holder. See Special Tools .

    Fig 1: Identifying 8 Engine Flywheel Mounting Bolts
    GM1480384Courtesy of GENERAL MOTORS CORP.
  1. Loosen the 8 engine flywheel mounting bolts.
  2. Remove 7 of the 8 engine flywheel bolts leaving 1 bolt at the top of the crankshaft rotation.
  3. Grip the engine flywheel and remove the remaining bolt. Do not drop the engine flywheel when removing the final bolt.
    4. Fig 2: Removing J 44214 From Engine Block
    GM651420Courtesy of GENERAL MOTORS CORP.
  4. Remove the J 44214  from the engine block. See Special Tools .
scientia non olet · About LEMON Manuals