LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 4.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Drive Belt Removal

Drive Belt Removal

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying Power Steering Pulleys, Drive Belt & Drive Belt Tensioner
    GM52981Courtesy of GENERAL MOTORS CORP.
  1. Insert a 1/2-inch drive ratchet in the drive belt tensioner (6).
  2. Rotate the drive belt tensioner clockwise in order to release the belt tension.
  3. Remove the drive belt from the power steering pulley (1).
  4. Slowly return the drive belt tensioner to its original position.
  5. Remove the drive belt from the remaining pulleys (2-5).
scientia non olet · About LEMON Manuals