LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Mechanical - 4.6L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Camshaft Cover Removal - Right Side >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

J 44212  Camshaft Holding Tool. See Special Tools .

    Fig 1: Identifying Ignition Coil Ground Strap & Bolt
    GM1207139Courtesy of GENERAL MOTORS CORP.
  1. Remove the right camshaft cover ignition coil ground strap bolt.
  2. Remove the right cylinder head ignition coil ground strap bolt.
  3. Remove the right ignition coil ground strap.
    4. Fig 2: View Of Camshaft Cover & Bolts
    GM522725Courtesy of GENERAL MOTORS CORP.
  4. Remove the camshaft cover bolts.
  5. Lift the camshaft cover from the cylinder head.
    6. Fig 3: Using Camshaft Holding Tool
    GM650538Courtesy of GENERAL MOTORS CORP.
  6. Install the J 44212  to the right cylinder head camshafts. See Special Tools .
scientia non olet · About LEMON Manuals