LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Mechanical - 4.6L (4 Of 5)) >> Off-Vehicle Repair Instructions (2 Of 3) >> Camshaft Cover Assemble

Camshaft Cover Assemble

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Separating Right Camshaft from Fresh Air Hose Fitting
    GM522719Courtesy of GENERAL MOTORS CORP.
  1. Install into the right camshaft cover the fresh air hose fitting.
    2. Fig 2: View Of Camshaft Cover Bolts
    GM576614Courtesy of GENERAL MOTORS CORP.
  2. Install the camshaft cover bolt grommets.
  3. Install the camshaft cover bolts.
    4. Fig 3: Identifying Left Camshaft Cover Gasket & Seals
    GM522722Courtesy of GENERAL MOTORS CORP.
  4. Install the NEW left camshaft cover gasket.
  5. Install the NEW left spark plug port seals.
  6. Install the NEW left ignition module ground/RFI spring port seal.
    7. Fig 4: Identifying Right Camshaft Cover Gasket & Seals
    GM522728Courtesy of GENERAL MOTORS CORP.
  7. Install the NEW right camshaft cover gasket.
  8. Install the NEW right spark plug port seals.
  9. Install the NEW right ignition module ground/RFI spring port seal.
scientia non olet · About LEMON Manuals