LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 4.6L - Introduction (2 Of 2)) >> Repair Instructions >> Evaporative Emission Canister Vent Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Identifying EVAP Canister
    GM1672169Courtesy of GENERAL MOTORS CORP.
  1. Remove the evaporative emission (EVAP) canister. Refer to Evaporative Emission Canister Replacement .
  2. Place the EVAP canister on a suitable work surface.
  3. Rotate the EVAP canister vent solenoid valve counterclockwise.
  4. Fig 2: Identifying EVAP Canister Vent Solenoid Valve
    GM1672170Courtesy of GENERAL MOTORS CORP.
  5. Remove the EVAP canister vent solenoid valve.