LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Electronic Compass Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Electronic Compass
    GM1204291Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector.
  2. Align the electronic compass to the openings in the rear shelf. Install the electronic compass.
  3. Install the sound barrier.
  4. Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.