Console Replacement - Front Floor

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Floor Console

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Remove the rear floor console. Refer to Console Replacement - Rear Floor . Remove the instrument panel lower trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Lower (w/Floor Console) . Set the parking brake, then shift the transmission into drive and push the shift indicator down until it locks, to allow clearance to remove the console.
1	Front Floor Console Screws (Qty: 2) Tighten: 2 N.m (18 lb in)
2	Front Floor Console Bolts (Qty: 2) Tighten: 10 N.m (88 lb in)
3	Front Floor Console Assembly
4	Front Floor Console Retainer Clips (Qty: 2)