LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Instrument Panel System Displays, Gauges And Console) >> Diagnostic Information and Procedures >> DTC B0935 >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

The internal fault detection of the electronic compass module is handled by the instrument panel cluster (IPC). The compass information is sent to the IPC via 2 discreet wire inputs from the electronic compass module. The IPC displays compass information in the driver information center (DIC). The IPC sets DTC B0935 when a compass software handshake failure has occurred. The compass hand shake failure occurs when the electronic compass module is not connected or the sensor circuit is open.

scientia non olet · About LEMON Manuals