LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Rear Quarter Upper Trim Panel
    GM1283311Courtesy of GENERAL MOTORS CORP.
  1. Remove the rear seat back. Refer to Seat Back Replacement - Rear (Non-folding) or Seat Back Replacement - Rear (Folding) .
  2. Remove the door weatherstrip from the pinch weld flange to expose the upper quarter trim panel.
  3. Remove the screw cover and screw in the top of the panel (1).
  4. Use J 38778  to disengage the push-in retainers and remove the trim panel.
scientia non olet · About LEMON Manuals