LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Rear Door Window Belt Inner >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sealing Strip - Rear Door Window Belt Inner
    GM1362848Courtesy of GENERAL MOTORS CORP.
  1. Lower the window to the full down position.
  2. Remove the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door .
  3. Lift the rear door window inner belt sealing strip off the pinch-weld flange.
  4. Remove the inner window belt sealing strip from the door.