LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Door System, Mirror System & Window System) >> Repair Instructions >> Sealing Strip Replacement - Front Door Window Belt Inner >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Door Window Belt Inner Sealing Strip & Pinch-Weld Flange
    GM308134Courtesy of GENERAL MOTORS CORP.
  1. Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
  2. Lower the window to the full down position.
  3. Remove the window belt inner sealing strip by lifting it off the pinch-weld flange.
scientia non olet · About LEMON Manuals