Circuit Description
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
The body control module (BCM) applies a ground through the brake pedal position sensor reference low circuit to the brake pedal position sensor (BPPS). The BCM supplies a 10-volt reference through the brake pedal sensor reference voltage circuit to the BPPS. When the brake pedal is being applied, the brake pedal sensor then sends a variable voltage signal through the BPPS signal circuit to the BCM.