LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Lighting Systems) >> Diagnostic Information and Procedures >> DTC B2545 >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

When the body control module (BCM) receives a class 2 signal from the power control module (PCM) indicating the gear selector is in the REVERSE position, the BCM applies battery positive voltage to the backup lamps voltage supply circuit. The backup lamps are grounded at G301 for the left backup lamp and G302 for the right backup lamp.