Installation Procedure
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the I/P antenna cable to the communication interface module by pushing on the square plastic housing.
- Route the I/P antenna cable along the I/P harness.
- Secure the I/P antenna cable to the I/P harness.
- Connect the body antenna cable to the I/P antenna cable.
- Install the carpet.
- Install the passenger lower pillar trim. Refer to Garnish Molding Replacement - Lower Pillar .
- Install the right I/P insulator. Refer to Closeout/Insulator Panel Replacement - Right .