Installation Procedure
WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Route the I/P antenna cable along the I/P harness.
- Secure the I/P antenna cable to the I/P harness.
- Route the body antenna cable behind the I/P bracket.
- Connect the body antenna cable to the I/P antenna cable.
- Install the carpet.
- Install the passenger lower pillar trim. Refer to Garnish Molding Replacement - Lower Pillar in Interior Trim.
- Install the right I/P insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
- Install the body antenna cable to the inner roof panel and the windshield pillar.
- Connect the antenna base lead.
- Install the headliner. Refer to Headliner Replacement in Interior Trim.
- Install the passengers windshield pillar garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar in Interior Trim.