Fore/Aft Adjustment

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Body Side Hinge

Courtesy of GENERAL MOTORS CORP.

Remove the front fender insulator in order to gain access to the body side hinge bolts.
Adjust the door fore and aft by repositioning the door as needed.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Tighten the body side upper and lower hinge bolts.
Tighten: Tighten the bolts to 33 N.m (24 lb ft).
Install the front fender insulator.