Recirculation Door Replacement
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
Recirculation Door Replacement
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
in Cautions and Notices. Fastener Tightening Specifications:
Refer to Fastener Tightening Specifications .Preliminary Procedure: Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement . |
|
| 1 | Screw, Actuator Recirculation (Qty: 2) Tip: Disconnect electrical connector. Tighten: 1.5 N.m (13 lb in) |
| 2 | Actuator, Recirculation Door Tip: Tilt recirculation door assembly to insert tabs into the HVAC module assembly. |
| 3 | Screw, Recirculation Door Assembly (Qty: 3) Tighten: 1.5 N.m (13 lb in) |
| 4 | Door, Recirculation Assembly |