LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Heating, Ventilation And Air Conditioning) >> Repair Instructions >> Heater Hose Replacement - Inlet (L26) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Heater Hose To Heater Core
    GM1204093Courtesy of GENERAL MOTORS CORP.
  1. Connect the heater inlet hose to the heater core.
  2. Use J 38185  in order to secure the heater core hose inlet clamp.
  3. Install the heater hose to the support bracket.
  4. Connect the heater inlet hose to the pipe adapter.
  5. Use J 38185  in order to secure the heater hose inlet clamp.
  6. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 3.8L.
  7. Fill the cooling system. Refer to Draining and Filling Cooling System (LY7) or Draining and Filling Cooling System (L26) in Engine Cooling.
scientia non olet · About LEMON Manuals