LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 61 (Rear Suspension System) >> Repair Instructions >> Stabilizer Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tires and wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. Fig 1: View Of Stabilizer Shaft Link
    GM614968Courtesy of GENERAL MOTORS CORP.
  3. Remove the left and right stabilizer shaft link lower nuts from the stabilizer shaft links (1).
    4. Fig 2: Clamp Bolts & Stabilizer Shaft
    GM1209600Courtesy of GENERAL MOTORS CORP.
  4. Remove the clamp bolts from the stabilizer shaft.
  5. Remove the stabilizer shaft from the rear suspension support.
scientia non olet · About LEMON Manuals