LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (HVAC System - Automatic) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right instrument panel (I/P) insulator. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages, and Console.
  2. Remove the I/P compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
  3. Fig 1: Recirculation Actuator
    GM1194922Courtesy of GENERAL MOTORS CORP.
  4. Remove the screws that secure the recirculation actuator to the HVAC module assembly.
  5. Remove the recirculation actuator from the HVAC module assembly.
  6. Disconnect the electrical connector from the recirculation actuator.