Removal Procedure
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Open the seat belt guide loop cover.
- Remove the guide loop nut.
- Remove the guide loop from the guide adjuster bracket.
- Remove the lower center pillar trim. Refer to Trim Panel Replacement - Lower Center Pillar in Interior Trim.
- Remove the intermediate guide bolts.
- Remove the anchor plate nut from the seat stud.
- Remove the anchor plate from the seat stud.
- Remove the seat belt retractor bolt.
- Remove the seat belt retractor from the lower center pillar.