Installation Procedure
WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
- Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).
- Install the left and right side stabilizer shaft insulator clamps.
- Install the left and right side stabilizer shaft insulator clamp bolts.
Tighten: Tighten the bolts to 38 N.m (28 lb ft).
- Lower the vehicle.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.