LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Power Steering System) >> Repair Instructions >> Power Steering Pulley Replacement (3.8L) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the power steering pump from the engine for clearance. Refer to Power Steering Pump Replacement (3.8L)  or Power Steering Pump Replacement (LY7) .
  2. Fig 1: Power Steering Pump Assembly
    GM293353Courtesy of GENERAL MOTORS CORP.
  3. Using J 25034-C  remove the power steering pump pulley from the power steering pump.