Engine Support Fixture

Tools Required

• J 28467-B  Universal Engine Support Fixture
• J 36462-A  Engine Support Adapter Leg Set. See Special Tools .
• J-28467-501 Engine Support Fixture Adapters

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
Fig 1: View Of J-28467-501 & J 28467-B Cross Bar Installed On Engine
Courtesy of GENERAL MOTORS CORP.
2. Remove the left engine mount strut and the bracket from the upper radiator support. Refer to Engine Mount Strut Bracket Replacement - Upper Radiator Support .
3. Assemble the J-28467-501 (2) to the J 28467-B  cross bar (1).
4. Install the J 28467-B  (1) and the J-28467-501 (2) to the fender rails.
Fig 2: Installing J 36462-A To Cross Bar
Courtesy of GENERAL MOTORS CORP.
5. Install the J 36462-A  (1) to the cross bar (2).
Fig 3: Support Lift Hook & Cross Bar
Courtesy of GENERAL MOTORS CORP.
6. Install the support lift hook (2) to the cross bar (1).
7. Install the support hook (1) to the right engine lift hook (3).
Fig 4: Installing Support Hook To Left Engine Lift Hook
Courtesy of GENERAL MOTORS CORP.
8. Install the support hook (1) to the J 36462-A  (2).
9. Install the support hook (1) to the left engine lift hook (3).
Fig 5: Releasing Pressure Off Of Engine Mounts
Courtesy of GENERAL MOTORS CORP.
10. Raise the engine to release the pressure off of the engine mounts.