LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Mount Strut Bracket Replacement - Right (L26) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
    2. Fig 1: Right Engine Mount Strut Bolt & Nut (L26)
    GM1210280Courtesy of GENERAL MOTORS CORP.
  2. Remove the right engine mount strut at the upper engine mount strut bracket. Refer to Engine Mount Strut Replacement - Left  and Engine Mount Strut Replacement - Right .
    3. Fig 2: View Of Lower Engine Mount Bracket
    GM327637Courtesy of GENERAL MOTORS CORP.
  3. Loosen the lower engine mount strut bracket nut.
  4. Remove the lower engine mount strut bracket bolts.
    5. Fig 3: Upper Engine Mount Strut Bracket & Bolts
    GM327736Courtesy of GENERAL MOTORS CORP.
  5. Remove the upper engine mount strut bracket bolts.
  6. Remove the upper engine mount strut bracket.
scientia non olet · About LEMON Manuals