LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Engine Mechanical - 3.8L) >> Repair Instructions >> On-Vehicle Repair Instructions >> Drive Belt Replacement (L26) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Drive Belt
    GM631112Courtesy of GENERAL MOTORS CORP.
  1. Lift or rotate the drive belt tensioner using a 15 mm box end wrench on the pulley nut.
  2. Remove the drive belt.