Camshaft Bearing Removal

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.

Tools Required: J 33049 Camshaft Bearing Remover/Installer. See Special Tools .

Fig 1: Camshaft Bearing Service Set

Courtesy of GENERAL MOTORS CORP.

Select the expander assembly and driving washer.
Assemble J 33049 .

Fig 2: Identifying Camshaft Bearings

Courtesy of GENERAL MOTORS CORP.

Drive out the camshaft bearings.