LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Wiper System & Washer System) >> Repair Instructions >> Wiper Arm Blade Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Wiper Blade & Wiper Arm
    GM815213Courtesy of GENERAL MOTORS CORP.
  1. Install the hook of the wiper arm through the opening in the wiper blade.
  2. Fig 2: Wiper Blade Clip Button & Wiper Arm
    GM815214Courtesy of GENERAL MOTORS CORP.
  3. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  4. Press the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  5. Operate the windshield wipers and inspect for proper operation.