LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Tires And Wheels) >> Repair Instructions >> Tire and Wheel Removal and Installation >> Tools Required >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle. Support the vehicle with suitable safety stands. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: View Of Tire/Wheel Assembly, Hub Assembly & Wheel Nuts
    GM656803Courtesy of GENERAL MOTORS CORP.
  2. Remove the wheel nuts from the tire and wheel assembly.
  3. Mark the location of the tire and wheel assembly to the hub assembly.
  4. Remove the tire and wheel assembly from the vehicle.
  5. Clean the wheel nuts, studs and the wheel and rotor mounting surfaces.
scientia non olet · About LEMON Manuals