Removal Procedure
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
- Using a small screwdriver, pry the wiring harness (224/225) electrical connectors off of the following components:
- Automatic transaxle fluid pressure manual valve position switch assembly (395)
- 1-2, 3-4 Shift solenoid valve assembly (315A)
- 2-3 Shift solenoid valve assembly (315B)
- TCC PWM solenoid valve assembly (334)
- Pressure control solenoid valve assembly (322)
- Automatic transaxle input speed sensor assembly (440)
- IMS (811)
- Gently pull the automatic transaxle fluid temperature sensor (391) from it's clip.
- Lift the wiring harness assembly (225) off of the transaxle.