LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Torque Converter Assembly Removal

Torque Converter Assembly Removal

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The torque converter weighs approximately 65 lbs. Personal injury may result if you lift the torque converter improperly.
    Fig 1: View Of Torque Converter Assembly
    GM47958Courtesy of GENERAL MOTORS CORP.
  1. Remove the torque converter assembly (1).
    2. Fig 2: Identifying Turbine Shaft O-Ring Seal
    GM10484Courtesy of GENERAL MOTORS CORP.
  2. Remove the turbine shaft O-ring seal (520).
scientia non olet · About LEMON Manuals