LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Second Clutch Housing Ball Check Valve Disassemble

Second Clutch Housing Ball Check Valve Disassemble

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Ball Check Valve Assembly In Second Clutch Housing
GM49043Courtesy of GENERAL MOTORS CORP.
IMPORTANT: If the ball check valve assembly (618) does not leak, do not remove the assembly.

Use a 6.25 mm (1/4 in) drift and a mallet in order to remove the ball check valve assembly (618) from the second clutch housing (617).

scientia non olet · About LEMON Manuals