LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Reverse Band Assemble >> Assembly Procedure

Assembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Reverse Band Assembly Inspection Areas
    GM10669Courtesy of GENERAL MOTORS CORP.
  1. Inspect the reverse band assembly (615) for the following:
    • Cracks
    • Scoring
    • Lining separation
    • Wear of the fiber material
  2. Inspect the apply lug for cracks.
    3. Fig 2: View Of Reverse Band Assembly
    GM870961Courtesy of GENERAL MOTORS CORP.
  3. Install the reverse band assembly (615) into the case with the band end aligned on the anchor pin in the case.
scientia non olet · About LEMON Manuals