LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Reaction Sun Gear and Drum Assemble >> Assembly Procedure

Assembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Inspection Areas On Reaction Sun Gear and Drum
    GM10619Courtesy of GENERAL MOTORS CORP.
  1. Inspect the reaction sun gear and drum assembly (678) for the following:
    • Worn or scored bushings
    • Damaged reaction sun gear teeth
    • The band apply area of the drum for discoloration or wear
    • The welds connecting the sun gear to the drum for voids or cracks
    • A worn or damaged 1-2 support outer race
  2. Fig 2: Installing Reaction Sun Gear And Drum Assembly
    GM893331Courtesy of GENERAL MOTORS CORP.
  3. Install the reaction sun gear and drum assembly (678) into the case.
  4. Check that the lugs engage with the 1-2 support roller clutch inner race.