LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Oil Pump Removal >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Oil Pump Bolts
    GM893320Courtesy of GENERAL MOTORS CORP.
  1. Remove the eleven indicated oil pump bolts (230, 231).
  2. Do not remove the one oil pump cover bolt (205) at this time.
  3. Remove the one wiring harness clip (390).
    4. Fig 2: Locating Oil Pump Assembly
    GM893321Courtesy of GENERAL MOTORS CORP.
  4. Lift the oil pump assembly (200) off of the control valve body (300).
  5. Set the oil pump assembly (200) on its cover.
scientia non olet · About LEMON Manuals