LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Oil Pump Drive Shaft Assemble >> Assembly Procedure

Assembly Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inspection Areas On Oil Pump Drive Shaft
    GM49391Courtesy of GENERAL MOTORS CORP.
  1. Inspect the oil pump drive shaft (227) for the following:
    • A scored or rough journal surface
    • Stripped or burred splines
    • A cut or damaged seal
  2. Install a new oil pump drive shaft seal (228) onto the oil pump drive shaft (227).
    3. Fig 2: Installing Oil Pump Drive Shaft Assembly
    GM49394Courtesy of GENERAL MOTORS CORP.
  3. Install the oil pump drive shaft assembly (227) into the case cover (400).
scientia non olet · About LEMON Manuals