Input and Third Clutch Pawl Disassemble
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
The third and input clutch pawl assemblies (727, 728) are serviced as assemblies, do not disassemble.
Disassemble the third and input clutch pawl assemblies (727, 728) and input sungear shaft (668) from the input clutch housing assembly (632).