LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Input and Reaction Carrier Removal >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Input Carrier Assembly
    GM893323Courtesy of GENERAL MOTORS CORP.
  1. Position the transmission so that the case cover joint is facing upward.
  2. Remove the input carrier assembly (672).
    3. Fig 2: Locating Reaction Carrier Lube Dam & Thrust Bearing
    GM10557Courtesy of GENERAL MOTORS CORP.
  3. Remove the input carrier, reaction carrier lube dam (673). The dam may be stuck to the input carrier assembly.
  4. Remove the thrust bearing (674) from the reaction carrier.
  5. Remove the reaction carrier assembly (675).
scientia non olet · About LEMON Manuals