LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Input Clutch and Third Clutch Functional Air Check >> Checking Procedure

Checking Procedure

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Fluid Passages
    GM10654Courtesy of GENERAL MOTORS CORP.
    NOTE: Do not exceed the recommended amount of air pressure or it may damage or cause seals to roll.
  1. Use a rubber tipped air nozzle in order to apply a maximum 138 kPa (20 psi) at each indicated fluid passage.
  2. Listen for the following:
    • The third clutch (1) assembly to apply
    • The input clutch (2) assembly to apply