LEMON Manuals: Even more car manuals for everyone
Home >> Buick >> 2007 >> Lucerne CX >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Automatic Transaxle - 4T65-E - Overhaul) >> Repair Instructions >> Input Clutch Housing Ball Check Valve Assemble

Input Clutch Housing Ball Check Valve Assemble

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2006 Saturn Relay, 2006 Pontiac Montana SV6, 2006 Pontiac Grand Prix, 2006 Pontiac G6, and 2006 Chevrolet Uplander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Inserting Input Clutch Housing Ball Check Valve
GM10649Courtesy of GENERAL MOTORS CORP.

Use a 9.5 mm (3/8 in) drift punch and mallet in order to assemble a new ball check valve assembly (633) into the input clutch housing.

scientia non olet · About LEMON Manuals